Internet speeds are increasing all over the world. But it is quite possible that your Windows PC may be facing the problem of slow Internet speed. If you face this issue, then it could occur due to misconfiguration in the router, some issue in the operating system or intervention by other installed software. There are various things that a user can do to fix this issue and get faster Internet speeds.
Fix Slow Internet speed on Windows 10 PC
You can carry out the following methods to resolve the slow Internet speed and make it faster:
- Configure the bandwidth allocation using the Group Policy Editor.
- Configure the router.
- Reset Windows Auto-Tuning Level.
- Check third party software intervention.
- Update, Rollback, or reinstall drivers.
1] Configure the bandwidth allocation using the Group Policy Editor
Open the Group Policy Editor and navigate to:
Administrative Templates > Network > QoS Packet Scheduler.
Select the policy setting for Limit reservable bandwidth.
The radio button should be set to be Enabled.
For percentage for Bandwidth limit (%) set it to 100%.
Select Apply and then OK.
Reboot your computer, and your internet speeds should be normal.
2] Configure the router
There might be chances that your internet speed would be limited by your router itself.
Speed limiters are installed in router configuration pages to regulate the Internet speed amongst connected devices.
You can try to disable any such limitations from your router’s control panel and check if that fixes your issue after you reboot your router.
3] Reset Windows Auto-Tuning Level
Windows Auto-Tuning helps installed programs to receive TCP data over the network. But sometimes, this usage can lead to mainstream internet slowdown on your computer. However, we can interrupt this feature and get our speeds bumped up.
It is dangerous to do because it may hamper the responsiveness and usability of your applications.
Open Windows Command Prompt with Admin level rights and execute the following command:
netsh interface tcp show global
You will now see a list of TCP Global Parameters and their status.
Execute this command to disable Windows Auto-tuning level:
netsh interface tcp show global autotuninglevel=disabled
Reboot your computer to have your internet speed bumped up.
4] Check a third party software intervention
You can check if any software is running in the background and hogging on your bandwidth.
You can check if from the Task Manager and if any of them is, you can just stop that download or force close that software using the Task Manager.
Boot in Clean Boot State and see if that improves the Internet speed.
5] Update, Rollback or reinstall your drivers
The drivers listed under the section of Network Adapters inside of the Device Manager might be a cause for this particular issue. You can try to reinstall the network drivers for your motherboard. If you recently updated these drivers, roll back these drivers, and check. If you did not, then we suggest you Update these drivers.
Hope something here helps you.
- Watch Olympian Katie Ledecky swim with full glass of milk on her head
- Tablets spike in popularity during pandemic lockdown, report finds
- Give your PC a 12-in-1 USB-C hub for $50
- FCC seeks comment on Trump’s plan to crack down on social media
- FDA lists hand sanitizers that don’t have a high enough alcohol level
- Limited number of hard-to-find Nintendo Switch Lite are in stock at Best Buy
- Facebook labels new viral Nancy Pelosi video as “partly false”
- iPhone 12 could launch in two stages
- Twitter under FTC investigation for alleged misuse of user data