Summary of effective ways to save electricity when using air conditioners
During sleep you will not need the temperature to be as cold as when you are awake. Therefore, please adjust the air conditioner to a moderate temperature between 25 – 29 degrees about 1-2 hours before going to bed, so the air conditioner will have to work less and use less power.
Besides, this also helps you and your family avoid catching a cold, especially at home with young children.
2. Use an air conditioner with a capacity suitable for the room area
Choose an air conditioner with a capacity suitable for the area (or volume) for your room, this helps to ensure the cooling capacity of the air conditioner, and at the same time helps you to optimize power consumption.
You should go to reputable air conditioning stores for careful advice before buying, this not only helps you save electricity when using, but also keeps the machine durable and stable.
3. Close the door when using the air conditioner.
If you leave the door open when using the air conditioner, the cold air will escape, the outside temperature will affect the room temperature, so the air conditioner will have to work harder and consume a lot of electricity.
Therefore, make sure that the room door is closed when the air conditioner is turned on, helping to increase the life of the machine and save on monthly electricity bills for your family. In addition to sealing the door, you can use cloths to seal the openings under the door to ensure that the cold air is not lost too much.
If just maintaining the machine well is not enough, for the machine to work well, you need to call a technician to clean the air conditioner. This can reduce up to 15% of the machine’s operating capacity, saving a huge amount of electricity, and increasing the life of the machine.
The number of maintenance times will depend on the environment and frequency of use in the year, but according to refrigeration experts, it is recommended to maintain the air conditioner once every 3-4 months (depending on how often it is used). Besides, you can also choose air conditioners with self-cleaning features, helping you to take the initiative in time, while saving the cost of calling a mechanic and ensuring the health of your family better.
5. Check the conduit and cover the heater
Sometimes dirt stuck in the pipes or leaking pipes can also be the cause of affecting the cooling system of the machine, which consumes a lot of electricity. Therefore, it is necessary to ensure that the gas pipes are placed properly and regularly cleaned.
In addition, when you first buy an air conditioner, if you install the heater outdoors, you should choose shady places, shielded from sunlight to help reduce the amount of heat exerted on the heater, increase the cooling speed. . You can also cover the heater with a heat-resistant tarp if you can’t find a cool installation location.
In addition, the heater should also be installed 30cm away from the wall, because when installed too close to the wall, the heater will radiate heat and affect the room temperature, the air conditioner must work with a higher capacity to cool.
6. Rearrange furniture so that it doesn’t block ventilation
Although the air conditioner has vents to help bring cool air to the right direction, it is best to arrange furniture so that it does not block the direction of the wind, so that you will also feel cooler faster, using less electricity. more power.
From 23 to 27 degrees Celsius is the right temperature for your air conditioner to operate optimally, without consuming too much power and still maintaining a moderate and suitable temperature (due to room temperature and humidity). outside temperature is not too big difference).
It is advisable to avoid heat exchange with the outside when using the air conditioner. Sunlight can cause the room temperature to rise, so the air conditioner will also have to work harder.
Covering the room will prevent sunlight from entering the room will prevent the room temperature from rising too high, you can use light colored curtains to shield and reduce the amount of heat absorbed.
Why should you not turn on and off the cold constantly? Because it will make the air conditioner have to consume a significant amount of electricity to restart and cool the room from the beginning.
It is best to increase the temperature of the air conditioner to the highest temperature (30 to 32 degrees) and close all windows and blinds. When you come back, you may feel hot for a few minutes, but the heat is not so great that your air conditioner has to work to cool it all over again.
Although we use air conditioners for cooling, using a fan will help circulate cool air in the room, which also means you don’t have to reduce the temperature too low, thus using less electricity.
In addition, fans use less electricity than air conditioners, so combining the two will save you a lot of energy.
Besides, the air conditioner fan is also one of the very good cooling devices today and you can use it in combination with the air conditioner to optimize cooling capacity, ensure health and save power.
Hopefully, the above useful information will help you use air conditioner safely and save electricity costs for your family.